Advantages:
Specification:
THERMOCOUPLE SENSORS
- TFCY, TFAL- K-Type
- Thermocouple Wire Duplex Insulated
COMMUNICATIONS
- Interface: Real Time Profile via BluetoothTM and
- Profile Stacking Cable: USB Type A, Male-to-Mini B, 5 pin Male
- Bluetooth: SD1000U Parani
POWER
- Battery: Built-in Lithium Polymer battery
( Rechargeable, 530mAh) - Full time Operation: 90 ten minutes Operation runs
- Charge Protection: optimized for Lithium Polymer Battery
- Charge time(Standard): Full: 6~7 hours
- Charge time(Rapid): Full: 2~3 hours
- Charging Current (Std.): 0.2CA(=84mA)
- Charging Current (Max.): 0.5CA(=210mA)
- Battery Life: 300~ 400 charging cycles or 3 years
(Minimum) - Operating Range: 4.2V to 3.7V
- Power Saving: Automatic switch-off after 20 min
DATA ACQUISITION
- Internal Flash Memory: 3.4GB (500millions data points)
- Available to stack upto 14,000 profiles
(based on 10mins / 250kb) - Detection Temperature Rage: (-)150°C to 1050°C
/ (-)101 - 1922°F - Temp. Accuracy: ±0.5°C
- Temp. Resolution: 0.1°C / 32.2°F
- Operating Inner Temp range: 0°C ~ 85°C / 32°F~185°F
- Start Trigger Temp: 15~50°C / 59~122°F
(Factory setting : 35°C / 95°F) - Sampling Rate: 0.1 - 10 readings/sec
(Factory setting : 4/sec) - Bluetooth Range: Up to 100m(unblock line of sight)
Minimum PC Requirements
- 1 GHz Processor / 1 GB RAM
- 2 GB available storage
- Display resolution 1024 x 768
- 1 available USB port for BluetoothTM Dongle
- 1 available USB port for software key
- Windows operating systems:
Windows™ XP SP3 - 32 or 64 bits.
Windows™ 7 - 32 or 64 bits.
Windows™ 8.1 - 32 or 64 bits.
Windows™ 10 - 32 or 64 bits.
iTT’s best combination of Software to maximize productivity and enhance quality.
PTI (Process Target Index) which is measured numerically and calculated statically, will let you know how exactly the profiling is executed. The center of the process is defined as 0 and the shortest path is defined as 99 %. If the target point is over 99%, it means the product in process is out of spec. iTT’s Navigator and optimizer solution will direct you setting parameters for maximizing the productivity and enhancing the quality.
SYSTEM INCLUSIONS: